It’s Hotone Friday! Check out the latest news from Hotone.

Updates for Ampero

Ampero Firmware Version 2.1 Released 3/12/2019


Improvements & Changes

 
  1. Greatly optimized expression pedal latency issue
  2. Optimized expression pedal curves
  3. Optimized Tuner interface reaction speed
  4. Shortened the crossfade time when switching effect modules on/off or switching presets
  5. Optimized footswitch operation experience when exiting Looper menu
  6. Now Looper Pre/Post selection can be saved
  7. Optimized MIDI communication efficiency
  8. Optimized USB Audio performance and stability
  9. Changed default output mode of unbalanced outputs (Global > I/O)
  10. Changed default recording mode of USB Audio recording (Global > USB Audio)
  11. General performance and stability improvements
 
Bug Fixes
 
  1. When using Ampero as an USB interface, the recorded L/R effect signals are reversed – FIXED
  2. When using Ampero as an USB interface, the recording signal level is too low – FIXED
  3. When using Ampero as an USB interface, in some cases, there might be glitching noise/pop noise during playback – FIXED
  4. Expression pedals won’t work in Drum/Looper menus – FIXED
  5. Footswitch 1+2 and 2+3 works only under default settings (FS 1+2=bank down, FS 2+3=bank up, Global > Footswitch) – FIXED
  6. Some effects may alter your tone when built-in expression pedal is off – FIXED
  7. Setting and saving EXP2 settings may cause screen, footswitches and knobs malfunction – FIXED
  8. Unit might be stuck when receiving MIDI messages – FIXED
  9. Minor bug fixes
 
 

Version B6.4

Released 1/25/2019

 

Improvements, Changes & Bug Fixes

 
  1. Optimized expression pedal latency issue
  2. Built-in expression pedal cannot reach min value when fully lifted up - FIXED
  3. In some cases, switching on No Cab mode may affect CAB module on/off status - FIXED
  4. Switching Looper Pre/Post position may affect your tone – FIXED
  5. In Looper menu, adjusting rec level may affect the effect overall gain/output - FIXED
  6. Previous patch location will be changed when switching banks - FIXED
  7. Some effects won’t work properly - FIXED
  8. In some cases, Ampero may be crashed when using the expression pedal - FIXED
  9. All outputs will be muted during factory reset progress
  10. General performance/stability improvements and minor bug fixes
 

Version 1.0

Released 1/11/2019

 

Initial Release


Ampero Editor Version 1.1.1 Released 3/14/2019


Precaution

 

In this software update, we changed USB communication methods between Ampero and your PC/Mac, which means, the new software will no longer recognize Ampero units with previous firmware (B6.4 and earlier). PLEASE UPDATE YOUR AMPERO TO THE LATEST FIRMWARE FIRST before using the new software.  

 

Bug Fixes

 

1.    Ampero Editor crashes when importing presets containing user IR files – FIXED

 

Version 1.1.0

Released 3/12/2019

 

Precaution

 

In this software update, we changed USB communication methods between Ampero and your PC/Mac, which means, the new software will no longer recognize Ampero units with old firmware. PLEASE UPDATE YOUR AMPERO TO THE LATEST FIRMWARE FIRST before using the new software.  

 

Bug Fixes

 

1.    In some cases, presets cannot be correctly imported/exported – FIXED

2.    Quick Access Knobs, EXP 1 & EXP 2 settings cannot be correctly read in CTRL menu – FIXED

 

Version 1.0.2

Released 2/14/2019

 

Improvements & Bug Fixes

 

1.    Quick start tips added at the first launch

2.    Effect description mistakes – FIXED

3.    Ampero Editor cannot get correct information from Ampero unit after factory resetting - FIXED

4.    Sync selections display error – FIXED

5.    Language selections aren’t working properly (Windows) – FIXED

 

Version 1.0.0

Released 1/25/2019

 

Initial Release

 

 



New Video demo from Ola Englund
Ola got Ampero through his “Ola testing $#it” series, great playing and some fantastic chops from the God of Thunder!


 





New audio demos from Gen


 
 



For more Ampero details, please click here