Hotone Friday February is coming! Remember to keep your XTOMP and Ampero updated!

New models in XTOMP library.

Messe Bass 400+

This model is based on the famous Mesa/Boogie® Bass 400+* bass amp head, one of Mesa/Boogie®’s rare bass products. As one of the most classic most classic and sought-after tube bass amps in history, the amp will never let you down.
The right output features a fine-tuned cab simulator based on the sound characteristics of a Mesa/Boogie® PowerHouse®* 4x10 bass cabinet with four 10-inch speakers.

*Mesa/Boogie® Bass 400+and Mesa/Boogie® PowerHouse® are product models of Mesa Engineering. The mentioned manufacturers and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.

Acoustilizer 2

This model is an acoustic preamp based on the famous AER® Colourizer 2*, which makes dull sounds come alive by enriching your acoustic sound with full dynamics and harmonics. A flexible 2-band EQ is onboard for further tone shaping.
The EQ switch is fixed to f2, and the enhancer switch is on with enhancer intensity knob fixed at noon. 

*AER® Colourizer is a stompbox model of AER Music GmbH. The mentioned manufacturer and product names are trademarks or registered trademarks of the respective owners. The trademarks were used merely to identify the sound character of this product.

Check out the Ampero rundown by Hotone Artist Denny Jiosa!


Keep your Ampero Updated!

A new firmware is released, please follow the directions to update the units:

1.Download the latest Ampero Editor software and firmware on the Support Page on Hotone Website;
2.Setup the Ampero Editor software on your PC/Mac;
3.Turn off the Ampero by on/off switch, connect it with PC/Mac by USB cable;
4.Run the software, press simultaneously the main knob(Menu/value), No.3 foot-switch and ''CTRL'' foot-switch, while turning on the Ampero. There will be an “UPDATE” text on the screen, just ignore it.
5.Click ''update'' on the software panel on your PC/Mac, select the downloaded firmware and wait for the update finish.
6.When update finish, disconnect the USB connection and restart the unit to finish the update procedure.

Omni Series coming soon!